Installation

Viewing 15 posts - 46 through 60 (of 67 total)
  • Author
    Posts
  • #5537
    Daniel Kari
    Participant

    Well, for me it did nothing. It is noticeable that you can customize a lot of symbols. But this is it so far. Regarding trade opening, unfortunately nothing has happened, still neither understand common trade language, nor does open limit or stop orders, nothing.

    #5585
    Lawrence Williams
    Participant

    Sorry to hear. I was hoping for some good support.

    #5712
    ANDRE MATTOS
    Participant

    Hello !
    I’m in trouble.
    I did all the steps correctly as the tutorials teach. Telegram was synchronized, but until that moment, it had not received any signal. I did not look at the VPS for about 30 minutes, but when I returned it reported a connection error and the FX-Water softwre ended (closed), but when running it there was an error saying that the application would have already been installed in another folder, giving understand that he was already being executed.
    Reboot Windows and made a new attempt to run. The problem persisted even though copying new files.
    I upgraded from Windows 7 but the problem persists.

    In the LOG this message appears:

    ERROR DETAILS
    Following errors were detected during this operation.
    * [12/21/2020 2:30:02] System.Deployment.Application.DeploymentException (DeploymentUriDifferent)
    – You cannot start application TelegramSignalProcessor from this location because it is already installed from a different location.
    – Source: System.Deployment
    – Stack trace:
    at System.Deployment.Application.ApplicationActivator.CheckDeploymentProviderValidity (ActivationDescription actDesc, SubscriptionState subState)
    at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation (Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl, Uri & deploymentUri)
    at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry (Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl)
    — End of stack trace from previous location where exception was thrown —
    at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw ()
    at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivationWithRetry (Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl)
    at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker (Object state)
    — Inner Exception —
    System.Deployment.Application.DeploymentException (DeploymentUriDifferent)
    – You cannot start application TelegramSignalProcessor from location file: /// C: /Users/trader/AppData/Roaming/MetaQuotes/Terminal/20A73DE46A4314ACD674B68223B979BE/FX-Water%20Application/TelegramSignalProcessor.application file is already C: /Users/trader/Documents/FX-Water%20Application/TelegramSignalProcessor.application. You can start it from location file: /// C: /Users/trader/Documents/FX-Water%20Application/TelegramSignalProcessor.application or you can uninstall it and reinstall it from location file: /// C: / Users / trader /AppData/Roaming/MetaQuotes/Terminal/20A73DE46A4314ACD674B68223B979BE/FX-Water%20Application/TelegramSignalProcessor.application. If you reinstall the application, be aware that you might lose any customizations that you made to the application.
    – Source:
    – Stack trace:

    COMPONENT STORE TRANSACTION DETAILS
    No transaction information is available.

    I Need yours help?

    #5720
    Daniel Kari
    Participant

    There was a problem with telegram last week. I have not received most of the signals. I restarted it yesterday and now it seems to be working, at least it is getting the signals, although still cannot process them and open trades.
    I suggest you to completely uninstall and remove the telegram signal processor and EA and start again from zero.
    For others: lets collect signals that are not opened and processed by the processor and EA.

    #5733
    Daniel Kari
    Participant

    Support, I hope you are reading this, please include these type of trade instructions in your processing software.
    These are the trade messages I receive and the EA is not opening any trades:

    EURGBP SELL 0.91121 SL 0.9166 TP 0.896
    USDCAD BUY 1.2869 SL 1.2812 TP 1.291
    NZDCHF INITIATE SHORT ENTRY POINT 0.62511 TP1 0.62445 TP2 0.62248 TP3 0.62000
    USDCHF INITIATE LONG ENTRY POINT 0.89108 TP1 0.89154 TP2 0.89335 TP3 0.89800

    #5779
    Veronika Momir
    Moderator

    Hi Daniel,

    We have released a new updated EA that deals with some issues of the last version and has better signal processing. Hope these improvements will be useful. Keep the suggestions and bug reports coming, and we’ll continue working to improve our product.

    Telegram.forex

    #5786
    Daniel Kari
    Participant

    Hi Veronika,
    Thanks for the heads up. Downloaded it. Will keep the team updated on what is working and what’s not.

    #5835
    cosmopolia154
    Participant

    THE PROGRAM IS NOT CONNECTED WITH MT4. WHAT TO DO?

    #6046
    Daniel Kari
    Participant

    v1.13.2-4 is out. let’s try it. I hope in will recognize the following trades e.g.:

    USDCAD BUY 1.2869 SL 1.2812 TP 1.291
    NZDCHF INITIATE SHORT ENTRY POINT 0.62511 TP1 0.62445 TP2 0.62248 TP3 0.62000

    #6047
    Daniel Kari
    Participant

    Nope. There is bigger problem as the EA does not even stay up. After 20 seconds it removes itself. License key is copied and double cross-checked, still it removes itself and does not stay up and running. Restarted mt4, recopied the files and still the problem remains.

    #6048
    Daniel Kari
    Participant

    Strangely enough even if I remove and reinstall the signal processor (fxwater app) it says ‘1 MT4 instance active’, although the EA is not even added. Than I add and after 23 seconds it removes itself.

    #6052
    Tiago Rodrigues
    Participant

    I did the correct installation, the program recognized the channels and receives the same.
    But on mt4, signals are not sent.

    #6445
    Mian Hassan Iqbal
    Participant

    I install it but its is not working everthing is pperfect telegram signal app show its 1 MT1 instant active and also show my telegram channel messeges but it not start to take order in mt4 at4 account?
    Also telll me do i need put telegram expert on every chart in MT4

    #6446
    Mian Hassan Iqbal
    Participant

    I install it but its is not working everthing is pperfect telegram signal app show its 1 MT1 instant active and also show my telegram channel messeges but it not start to take order in mt4 at4 account?
    Also telll me do i need put telegram expert on every chart in MT4

    #6488
    Savell Martin
    Participant

    I am unable to get a Telegram code.
    I installed the application, put in my phone number and then nothing at all.
    I disabled the firewall and still nothing.

    If I randomly click Save I get this exception error:

    ************** Exception Text **************
    System.NullReferenceException: Object reference not set to an instance of an object.
    at TelegramSignalProcessor.frmMain.SaveCredentials(TelegramAccount item)
    at TelegramSignalProcessor.frmSetup.btnCancel_Click(Object sender, EventArgs e)
    at System.Windows.Forms.Control.OnClick(EventArgs e)
    at System.Windows.Forms.Button.OnClick(EventArgs e)
    at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
    at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
    at System.Windows.Forms.Control.WndProc(Message& m)
    at System.Windows.Forms.ButtonBase.WndProc(Message& m)
    at System.Windows.Forms.Button.WndProc(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3750.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
    —————————————-
    TelegramSignalProcessor
    Assembly Version: 1.0.0.2
    Win32 Version: 1.0.0.2
    CodeBase: file:///C:/Users/Administrator/AppData/Local/Apps/2.0/6OER6J33.M2Y/TH3B31R6.VKT/tele..tion_d0bfb6abbeab5298_0001.0000_b29518f07d20303b/TelegramSignalProcessor.exe
    —————————————-
    Microsoft.VisualBasic
    Assembly Version: 10.0.0.0
    Win32 Version: 14.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    —————————————-
    System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3650.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
    —————————————-
    System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3750.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
    —————————————-
    System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3701.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    —————————————-
    System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    —————————————-
    System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3630.0 built by: NET472REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    —————————————-
    System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2612.0 built by: NET471REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
    —————————————-
    System.Runtime.Remoting
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2114.0 built by: NET47REL1LAST
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    —————————————-
    TeleSharp.TL
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/Administrator/AppData/Local/Apps/2.0/6OER6J33.M2Y/TH3B31R6.VKT/tele..tion_d0bfb6abbeab5298_0001.0000_b29518f07d20303b/TeleSharp.TL.DLL
    —————————————-
    TLSharp.Core
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/Administrator/AppData/Local/Apps/2.0/6OER6J33.M2Y/TH3B31R6.VKT/tele..tion_d0bfb6abbeab5298_0001.0000_b29518f07d20303b/TLSharp.Core.DLL
    —————————————-
    Ionic.ZLib
    Assembly Version: 2.0.0.14
    Win32 Version: 2.0.0.14
    CodeBase: file:///C:/Users/Administrator/AppData/Local/Apps/2.0/6OER6J33.M2Y/TH3B31R6.VKT/tele..tion_d0bfb6abbeab5298_0001.0000_b29518f07d20303b/Ionic.ZLib.DLL
    —————————————-

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:

    <configuration>
    <system.windows.forms jitDebugging=”true” />
    </configuration>

    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

    What am I doing wrong?

Viewing 15 posts - 46 through 60 (of 67 total)
  • You must be logged in to reply to this topic.